Medicine Stability Test Chamber
Introduction
This equipment provide a long time stable environment of temperature, humidity and illumination for the Pharmaceutical industry medicine invalidation evaluation. It’s applied in the medicine accelerating test, growth test, high humidity test and high illuminance test.
Features：
* The Inner chamber is 304 high-quality stainless steel, full arc design, easy to clean and maintain.
* The unique air duct design ensures the uniform temperature and humidity in the box.
* Remote monitoring via mobile phones and computers.
*It has three levels of password authority management function.
*Data recording system can record more than 1 million pieces of data, even if the power failure, the data will not be lost, can be exported through the U disk.
*Conforms to the national pharmacopoeia, GMP, FDA, ICH and other relevant standards for long-term test, intermediate test, accelerated test, with stable and reliable performance to meet the requirements of temperature, humidity, light and other environmental conditions in multiple drug tests.
Movable shelf
Fluorescent lamp
High water-proof grade
illumination sensor
Built-in printer
Blood Gas & Electrolyte Analyzer BGE800 Series
Features:
â‘ . 10.4'' TFT Touch Screen
â‘¡. Infrared human-dector
â‘¢.Auto QC Cartridge
â‘£.Easy to use,fast data input
⑤.Cost-saving standy mode
â‘¥.Rich data management
⑦.Flexible and simple calibrants cartridge
⑧.Friendly operation interface
Models:
BGE-800A:pH(CH),pCO?,pO?,K,Na+,CI-,Ca++,Hct, B.P.
BGE-800B：pH,pCO?,pO?,Hct, B.P.
BGE-800C：pH,pCO?,pO?,Na+,CI-,Ca++,Hct, B.P.GLU,Lac
Model
BGE-800 Series
Sample
Whole blood, Serum, Plasma, Dialysate, CSF
Input Parameters
Patient Temperature,Hemoglobin,FiO2,B.P.
Analysis Time
＜90s
SampleVolume
95ul (whole blood),35ul (capillary blood)
Calibration
Automatic,Programmable,One-point and Two-point
Data Storage
More than 10000 Results
Display
10.4'' TFT Touch Screen
Battery
Lead Acid Battery,2.3Ah
Printer
Build in Thermal Printer,70mm
Barcode Reader
Up to 14 Kinds Barcode Type
Interface
Serial Line RS-232
TCP/IP Interface
USB Port
Integrated Bar-codeReader
WorkingTemperature
15℃~30℃
StorageEnvironment
5℃~45℃
PowerSupply
100-240V~50/60Hz
Package Size
800*680*640mm
Gross Weight
50KG
Epidemic Prevention Products
1) Disposable Virus Sampling Tube Kit
Introduction:
In the current epidemic situation, virus sample collection is an important part of virus detection. The single-use virus sampling tube can collect, transport, Inactivate and store virus samples from specific parts of the human body.
Advantage:
★ Easy to operate and use.
★ Adding virus stabilizing ingredients can maintain the activity of the virus in a
wide temperature range. and reduce the decomposition rate of the virus (Non-inactivated
type).
★ Contains virus cleavage and virus nucleic acid preservation solution, which can quickly
cleave the virus,to release nucleic acid and store the nucleic acid stably (Inactivated
type).
Test Procedures:
1. According to different sampling requirements, use a sampling swab to sample at the
corresponding part.
2. Place the swab after collecting the sample in a sterile sampling tube.
3. Put the swab into the preservation solution and break it from the breaking point.
4. Tighten the sterile sampling tube cover.
5. Mark the relevant sample information on the label of the sampling tube.
Product Components:
1. Non-inactivated type
Package
10/20/50 Tubes Per Box
Each Tube Contains
Sampling Tube
10ml*1PC
Sampling Swab
Quantity Optional
Preservation Solution
1/3/5/6ml(optional)
2. Inactivated type
Model
No swab type, single swab type, double swab type
MediumSpecification
5ml tube with 2ml medium, 10ml tube with 3ml medium (customizable)
Package
10/12/20/24/48/50tubes per box(optional package)
Operation process
Feature
1. 7-inch touch screen, easy to use, fast response.
2. User-defined cracking and elution temperature.
3. UV disinfection fuction, time range 1min-24hour.
4. control system, no need connect to computer.
5. Free programming to meet the needs of different reagent.
6. Open system, fully automatic, stable results and good repeatability.
7. Extract rapidly 15-40 minutes , 32/48 samples can be extracted at the same time.
3) Nucleic Acid Extraction System
Feature
1. Open system, fully automatic, stable results and good repeatability.
2. 7-inch touch screen, easy to use, fast response.
3. Automatic control system, connect to computers wirelessly.
4. User-defined cracking and elution temperature.
5. Free programming to meet the needs of different reagent.
6. Extract rapidly 15-60 minutes , 32 samples can be extracted at the same time.
7. According to different reagents to optimize the purification scheme to achieve .
8. higher extraction efficiency and purity.
9. Built-in UV disinfection and air duct, avoid cross contamination.
Technical Parameter
Multi-mode Operation
List mode, shortcut, view mode
Processing Volume
20μL-1000μL
Sample Throughput
1-32
Magnetic Bead Recovery
>98%
Extracting the Difference Between Holes
CV≤3%
Heating Temperature
8 independent heating modules, customize lysis and elution temperature (temperature range) according to your needs
Oscillating Mixing
Low,medium and high third gears are adjustable, and the fluctuation range can be adjusted with the reagent volume
Reagent Type
Magnetic bead open platform
Extraction Time
15-60 min/round (depending on the reagent used)
Internal Program
Be able to store >500 groups of programs
Program Management
Powerful program editing capabilities to meet different reagent needs. U disk program import and export can be achieved
Safety Door Design
After the safety door is opened,the program operation will be automatically suspended, and the program can continue t run after the safety door is closed
Built-in Air Duct
Built-in air duct to avoid cross infection
Safety Protection
Support power-off protection and continuous operation after power is restored
Flashlight
Yes
Ultraviolet Irradiation
Yes
Package Size (W*D*H)mm
650*540*560
Gross Weight(kg)
50
BK-AutoHS96 adopts vacuum blood vessels directly to the machine, and integrates the sample carrier, reagent carrier, gun head carrier, sample adding arm, grasping arm, oscillation heating module, refrigeration module, magnetic suction module, bar code scanning module, protection system, transportation system and industrial control system. With one-button convenient operation and standardized workflow, it can greatly reduce manual operation errors and improve the accuracy of test results, thus providing a systematic solution for creating a highly refined, simplified, automated and systematic laboratory.
Model
BK-AutoHS96
Throughput
48 sample/batch (MB); 96 sample/batch(OT)
Extraction time
MB: 48 samples/120min; OT: 96 samples/40min
Sample
Serum, plasma, throat swab, anal swab, stool, reproductive tract, secretions, exfoliated cells, urine, sputum, etc.
Consumable
All size blood tubes, 1.5ml/2.0ml centrifuge tubes
Supported reagent
Pro HBV, HCV, HPV, STDs, EB, HCMV, TB, HFMD and etc.
Extraction volume
1-3ml
Pipetting volume
10-1800μL
Pipetting tip
2 channel tip
Operating temperature
15-22℃
Ambient humidity
30-80%
Illumination
White cold light source
Software
Build-in operation software with error self-check function
Interface
2 RS232, 4 USB, 2 network ports, 1 HDMI
Power supply
Input: AC 110V-240V, 50/60Hz, 350VA
Package Size (W*D*H)mm
1400*960*910
1400*960*1110
1500*960*260
Gross Weight(kg)
385
5)Automatic Nucleic Acid Extraction System BK-
AutoHS96
BK-HS96 is a high throughput, high sensitivity automatically extracted nucleic acid purification equipment, matching nucleic acid extraction kits is used to automatically complete the extraction of sample nucleic acid, flexible, stable result, low cost, equipped with efficient filtration device and safety gate design, it can effectively avoid cross infection and ensure the quality of nucleic acid extraction., guarantee the quality of nucleic acid.
Feature
*Display: 10.1 inch touch screen, easy to operate.
*Accurate temperature control and rapid temperature rise, can be adopted to actively reduce
to room temperature and store samples in a short time at low temperature.
*The module is integrated with shocking and heating, which can be mixed with shock while
heating, saving extraction time.
*Equipped with ultraviolet disinfection lamp, HDPE high efficiency filter and safety door
protection function,it can effectively prevent aerosol pollution.
Model
BK-HS96
Nucleic Acid Extraction Method
Paramagnetic particle method
Sample Capacity
96-well
Sample Volume
20-1000ul
Extraction Time
15min-60min
Magnetic Bead Recovery
≥98%
Magnetic Flux of Bar
3000-6000Gs，can change others
Operating Temperature
RT-105℃
Shock Function
Yes
Temperature Accuracy
0.1℃
Sample Protection Function
Power on self-check, power off protection, high-temperature alarm, over-temperature protection
Disinfection Method
UV Light
Safety Door Design
The instrument is suspended when the safety door is opened
Operating System
Windows system
Scanning
Optional
Storage
>1000
Interface
USB interface
Power Supply
AC100-240V 50Hz/60Hz
Package Size(W*D*H)mm
1138*733*1028
Gross Weight(kg)
70